Home  
Rig's
Project's
   
  Careers  
HSE
Contact Us  
 
RIG # 4
RIG DESCRIPTION
 
 
DRAW WORKS                              NATIONAL 110 UE 1500 HP
                                                        Rated capcity 1500HP, Main drum groove lebus for line size 1 3/8”
                                                        National B-1 make-up and Brake out catheads
                                                        Elmago model 6032 electric Baylor Brake.              
                                                        Electric motor drive 2XGE 752 ARB3
 
POWER                                             3 ea CAT. 3512, KATO 1030 AC Generator
                                                          IPS 4 bays SCR Converters DC Power system
 
MAST                                                EMSCO Cantilever 142 ft Adjustable platform and casing board
                                                          Gross nominal capacity 1,000,000 lbs,
                                                          Capable of racking 4,300 mtrs of 5’’ drill pipe
                                                          Heavy duty vapour tight fluorescent lighting system.
 
SUBSTRUCTURE                            EMSCO Elevating,
                                                          Setback 600,000 lbs 1,000,000 lbs simultaneous with rotary.
 
CROWN BLOCK                                National 750 FA (or equivalent), Number of sheaves seven.
                                                          Diameter of sheaves 60”/ Gross capacity tons 583, Line size 1 3/8”
 
TRAVELLING BLOCK                       National Series 660H500, Number or sheaves six / Diameter of sheaves 50”
                                                          Line size 1 3/8”/ Maximum capacity 500 ton
 
HOOK                                                JOY H-500, Rated capacity 500 tons
 
TOP DRIVE                                       Varco TDS 11SA  500 ton. Drilling torque 27,500 ft/lbs @ 0-100rpm
                                                           Continues drilling torque 150- 300 rpm
 
SWIVEL                                              National P-400 Rated capacity 400 tons, 3’’ ID gooseneck / washpipe
 
KELLY SPINNER                                 International A6C, Right and left hand torque 1800ft/lbs at 150 rpm
 
ELEVATOR LINKS                              Minimum 360 ton, BJ Weld less
 
ROTARY TABLE                                 National /Oilwell   / Static load capacity 500 ton,
                                                             Driven by drawworks rotary shaft/ 27 ½” opening.
 
MASTER BUSHINGS                          Varco, Pin drive, Solid c/w Insert bowls Nos 1,2,3.
 
KELLY DRIVE BUSHINGS                   Varco HDP Pin drive, Kelly wiper rubbers
 
KELLYS                                                  Two 5 Ό” HEX, Connections 6 5/8” Reg LH Upper, 4 ½” IF Lower.
 
MANUAL SLIPS                                     B&V. RSX extra long/ Capacity 400 ton
DRILL PIPE                                            Two for each size of drill pipe / 3 ½” and 5”
 
MANUAL SLIPS                                    B&V
DRILL COLLARS                                   DSC/DCM/DCL. Multisegments forged, Capacity 400 ton,
One for each size DCs. 4 Ύ”,6”,8” 9 ½”
 
ELEVATORS                                           B&V
DRILL PIPE                                            2 sets for 3 ½” 250 ton rating
                                                                2 sets for 5”     350 ton rating
 
ELEVATORS                                           B&V
DRILL COLLARS                                   Rated capacity 150 ton./Two for each size DCs , 4 Ύ”,6”, 8”, 9 ½”
 
MANUAL TONGS                                   VARCO/ WOOLLEY  Type  B   
Covers API Pipe sizes from 3 ½” to 13 3/8”
Torque ratings         3 ½” to 5”   55,000 ft/lbs, Varco Type SDD .
Torque ratings 4” to 9 ½”   100,000 ft/lbs.
 
BIT BREAKERS                                      1 ea 20” 17 ½’’, 12 Ό’’ , 8 ½’’ 6’’
 
BIT GUAGES                                          1 ea  20”17 ½’’ , 12 Ό’’ , 8 ½’’ , 6’’
 
MANUAL CASING SLIPS                     B&V.
AND BOWLS.                                         CSL. Capacity 350 ton, One set of bowls and 2 sets of slips for.
20” 13 3/8” 9 5/8” 7” Casing
 
CASING ELEVATORS                            B&V/  SDS 150/4  150/3   150/2
SIDE DOOR ELEVATORS                     Capacity 150 ton/  One each for casing sizes, 20”, 13 3/8” 9 5/8’ 7’
 
SINGLE JOINT ELEVATORS                B&V / Capacity 5 ton, One each for 20” 13 3/8” 9 5/8” 7”.
 
CASING SPIDER AND                           B&V Type S-350
SLIPS                                                     Capacity 350 ton   Manual and Air Operated,  
                                                                Casing Range 7” 9 5/8” 13 3/8”
 
CASING MANUAL TONGS                    Varco / Woolley, Type B.
Two sets. Pipe range 7” to 13 3/8.
Torque range 7”          55,000 ft/lbs
9 5/8”     40,000 ft/lbs
13 3/8”    30,000 ft/lbs, Extention B  20”          25,000 ft/lbs.
 
CASING POWER TONG                        Weatherford 20” Casing hydraulic tongs, Torque 35,000 ft/lbs.
                                                                ECKEL  / Type 100689.
Range 4”to13 3/8”
Torque 25,000ft/lbs
 
TUBING POWER TONG                        Eckel  4 Ό” UHT, Jaw assemblies for 2 3/8’’ to 5 ½’’ tubing.
 
HYDRAULIC POWER UNIT                  ECKEL, Type  F6L-912 Diesel air start.
1000 psi at 60 gpm. 2500 psi at 21 gpm
 
DRILL PIPE                                            12000 ft of Grade S-135, 19.5 ppf, Range 2
                                                               
 
HWDP                                                     30 Joints 50 ppf  HWDP
 
DRILL COLLARS                                   6 joints of 9 ½’’ Spiral drill collars
                                                                24 joints of 8 Ό’’ Spiral drill collars
                                                                24 joints of 6 ½’’ Spiral drill collars
 
MUD PUMPS                                         National  10 P 130.
Two Numbers
Rated input 1300HP@ 140 SPM
Maximum Pressure 4” Liners  5000 psi
                                                                Capable of pumping 651 gpm with 6 Ύ” Liners..
Pulsation Dampeners Hydril K-20-5000  psi
                                                                Centrifugal charge pumps 6x8 Mission power 75 HP motors.
                                                                Each pump driven by 2Nos GE752ARB 1300HP Electric motors
 
MUD TANKS                                          3 Mud Tanks 1,157 barrel active system
                                                                750 barrel reserve tank
                                                                1 each trip tank. 80 bbl capacity minimum
                                                                1 each poor boy de-gasser
                                                                1 each  centrifugal de-gasser
                                                                Agitators in each compartment
                                                                Bottom guns in each compartment
 
MIXING HOPPERS                                2 able to suck and discharge to and from
                                                                Any compartment of the active and reserve system
 
SOLIDS CONTROL                                3 Swaco  shale shakers linear motion
                                                                1 each multi-cone de-sander
                                                                1 each multi-cone de-silter
                                                               
PIPING                                                   Mud pump, standpipe manifold, rotary hoses, 5,000 psi working pressure
 
BOP STACK 21 Ό”                               Shaffer, Annular 21 Ό” x 2000 psi wp.
One double 21 Ό” BOP X 2000 PSI  WP.
C/W  5” Drill Pipe rams,
Blind rams.
13 3/8”Casing rams.
Drilling Spool. 21 Ό”x 2000psi
With two 3 1/16 -10,000 psi Outlets
Spacer spool   21 Ό”(length 47”)
 
BOP STACK 13 5/8”                             Shaffer, One Annular BOP 13 5/8”X 5000psi
                                                                1 ea double gate ram Shaffer Preventor 13 5/8’’ x 10,000 psi wp.
                                                                1 ea single  gate ram Shaffer  Preventor 13 5/8’’ x 10,000 psi wp.
Complete with the following Ram assemblies.
3 ½” Drill pipe /  5” Drill pipe.
3 ½” to 5” variable ./ 7” / Casing.
9 5/8” Casing.
Shear/Blind./  Adapter Flanges.
13 5/8x10k – 13 5/8” x 71/16- 10k
13 5/8x 10k---13 5/8”x  11”   - 10k
13 5/8x10k---13 5/8” x   5k
 
DRILLING SPOOLS                              13 5/8x10k with two 4 1/16-10k outlets,
                                                               Spacer spool, 13 5/8”x 10k (length) 47”
 
BOP ACCUMULATER                            NL SHAFFER, TYPE 80.
Reservoir Capacity  200 gallons.
20 Bottles Capacity  220 gallons
Working Pressure 3000 psi
One Triplex electric pump.
Two air operated pumps.
Two remote controls, One Drillers control panel
Rig floor. Six station Shaffer Type 80.
 
CHOKE MANIFOLD                               3 1/16”-10,000 psi Shaffer
                                                                Complete with  One manually operated choke
One hydraulic operated choke’
Control consol remote operated  choke panel
With pump stroke counter for two pumps and
Adjustable choke.
BOP side valves are each manually operated
And hydraulic operated gate valve on choke line side.
Check valve on kill line side.
 
SURVEY EQUIPMENT                           Totco, 8 degree & 16 deg clock, Overshot on .092 wireline
 
FISHING EQUIPMENT                          Bowen series 150 overshots for each size hole
                                                                Bowen type Z fishing jars
                                                                Bowen bumper subs
                                                                Grapples to fit all in hole tools.
 
AUXILLARY EQUIPMENT                     Air compressors  Two.
Sullair G 466 Capacity 250 scf/m
Supply pressure 125 psi
Volume air receivers 520cfm
Welding machines Two
Type  Miller     500amps .
Oxy and acetylene cutting machines Two
Workshop and repair facilities.
With machines and tools.
High pressure wash down unit / Model 1500.
Diaphram pumps Nos-2 Wielden air operated.
                                                                One each crane. Minimum 50 ton.
 One Caterpillar forklift 966 8 ton.
 
ACCOMMODATION                              Company representative office
RIG SITE                                               Complete office furniture with lounge room
Combination .Bathroom and bedroom,
Full climate control, photocopy machine
Rig Manager same as above.
Service company office Double ended office fitted
Out with furniture.
Contractors Office.
Complete office furniture ,toilet@ shower in the middle.
Full climate control. Photo copy machine, computer,
Medic room fully equipped with sick bed.
 
CAMP SITE                                            Fully air conditioned and sound proof quarters
With facilities to feed and sleep Company and Its contractors
in addition to
 contractors personnel.
Kitchen and Dining rooms, both Senior and Junior.
Recreation rooms Senior and Junior, Hospital room/sick bay
 
DIESEL ELECTRIC                                 Two Caterpillars 3406 DITTA.
GENERATOR                                          KVA 635  VOLTS 400. Hz 50
  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
 

Copyright © 2006 . Yemen Drilling Company Ltd.All rights reserved