Home  
Rig's
Project's
   
  Careers  
HSE
Contact Us  
 
RIG # 550
DRILLING AND WORK OVER
RIG DESCRIPTION
MANUFACTURER                  Cooper LTO-550 , Mobile –Workover Drilling Rig.
 
DRAWWORKS                                        Model 550/4212-42-550HP.
Main Drum. Demountable ,forged steel brake rims,
42” diameter x 12” wide.
Drum shaft diameter is 6 ½”
Single line pull is 45,000lbs
Drum diameter 16” x 38” Lebus grooved
1 1/8” Drilling Line.
Clutch Fullair,2 Plates 24”
Sandline drum. Wireline capacity 14,000 feet of 9/16”
11,800 feet of 5/8”.
 
AUXILLARY BRAKE                              Hydromantic Brake ,Cooling water system.
 
CATHEADS                                            Cooper Hydraulic 
 
POWER GENERATION          Diesel, Generators, Caterpillars, Type 3406.
DISTRIBUTION                                     Numbers Two.
EQUIPMENT                                           Output rating   250 KW.   460/120 V, Three  Phase  60Hz
 
MAST                                                     Cooper telescoping.
Height.  112 feet clear working height from ground level.
Rated capacity   250,000 lbs.
Max static hook load.              6 lines = 235,000 lbs
8 lines = 250,000 lbs
Set back capacity    220 Stands of 3 ½” Tubing Range 2
206 Stands of 4 ½” Tubing Range 2
190 Stands of 51/2” Tubing Range 2
 
RIG FLOOR                                            Adjustable Working Platform and Sub Structure.
T-Type 20 feet   12 x 38 ft with rig floor 8ftx8ftx12ft.
 
ROTARY TABLE                    Cooper    Size 17 ½”, Complete with Master Bushings and Insert bowls.
 
CROWN BLOCK                      Cooper. Cross mounted. Rated capacity  250,000lbs.
Number and diameter of sheaves   1 x 36”& 4 x 24”
Groove size 1 3/8” ( One sandline sheave Groove 9 /16)
 
TRAVELLING BLOCK                            COOPER  SHORTY 
Number of sheaves and diameter   4 x 24”
Groove size 1 1/8”
Rated capacity  125 MT.
 
HOOK                                                      Incorporated with block
Rated capacity 125MT.
 
POWER SWIVEL                                    BOWEN  Hydraulic  SA-100 ton
Type:    Hydraulic 
Rated capacity 260,000 lbs.,
Working Pressure 4,500 psi Maximum.
Rated Power 130 HP.
Maximum Torque  10,750 lbs in low gear.
Maximum RPM.      160 in High gear.
Continuous torque rating 10,750 ft/lbs at 3000 psi
Intermitting torque rating services 3500 psi , Maximum  RPM  160.
 
HYDRAULIC POWER                            Manufacturer :    King 
UNIT                                                       Hydraulic, Rated capacity 130 HP.
 
DRILLING LINE                     Manufacturer: Hercules
ANCHOR                                                 Tension Load sensor  : HA129, Range  0 to 300,000 lbs. 
 
DRILLING LINE                     3,500 feet of 1 1/8” IWPS.
 
TRIPLEX PUMPS                                   Manufacturer: Gardner Denver.Type;
PZ-7  :4” Bore x 7” Stroke.
Hydraulic HP 550./ Input HP. 295.
Maximum discharge Pressure  w/4” Liners.
5000 psi.
Maximum SPM = 140./ Powered
by Two Caterpillar
motors 33
Charge pump Numbers ONE. 
Mission Centrifugal  11” Impellor
Discharge flow :900 GPM,40 PSI./ 75
HP Electric Motor.
 
DISCHARGE LINES                               Mud discharge lines  2” ID, Working pressure 5,000 psi.
 
STANDPIPE ETC                                    Standpipe line 2” ID .
Working Pressure 5,000 psi.
Chiksans, high Pressure hoses
Working Pressure 10,000 psi.
 
WELL CONTROL                    BOP Stack / Manufacturer : Hydril  GK
EQUIPMENT                                           Hydril  GK / Annular  11” x  5,000 psi WP.
Cameron 11” BOP Double Ram preventor 5000 psi WP
11” BOP SIingle  Ram preventor 5000 psi WP
C/W Four by  4 1/16 x 5000 psi. Outlets.
 
H2S Trim  API RP5 3 Compliance
Pipe Rams. 2 7/8”,3 ½”,4 ½”,5 ½” Blind.
Two sets of each./ Adapter spool  One each 11”
3000psi x 11”5000psi.
BOP Lifting equipment./ Overhead trolleys c/w 20 Ton hoists
Choke Lines. Number one coflex type .3” X  10 Mtrs
 5000 PSI WP. 10 k
Test 4 1/16 Connections. Manual Valve one 3 1/8”x 5000psi.
One HCR Valve 3 1/8” x 5000psi.
Kill line. Number one coflex type 3” x 6 Mtrs 5000psi
 WP. 10 K Test.
Two 3 1/8”Manual valve x 5000psi WP. One check valvex 5000psi   
Working pressure,
 
Choke Manifold. 5000psi WP. Minimum ID 3” Gate valves Nos  9 
Cameron type flanged RTJ. H2S Trim.
One manual adjustable choke  Cameron style H2 Flanged 3 1/8”
5000psi WP. 
One Swaco Hydraulic 2 9/16” 10,000psi WP.
Remote control panel drill floor.Flanged RTJ BX153. Choke manifold
Annular gauge and stand pipe pressure gauge  6000psi pressure
Each gauge.
 
BOP HYDRAULIC                 Koomey/ Model type 80 / Working Pressure 3000 psi.
POWER UNIT                                         Reservoir volume  210 gal./ Accumulater bottles
volume  11gals
Numbers  Six /Total volume  60 gals
Electric pump Koomey Triplex.
Two air pumps. Type  60-1 ratio air operator.
Model : Plunger Type.
 
HYDRAULIC CONTROL        One each air motor driven pressure reducing valve.
MANIFOLD                            One each manual pressure  reducing and regulator, Koomey Type 80, HCR Valve.
 
REMOTE CONTROL                               Koomey / Type 80, Location Rig floor.
 
MUD TANKS AND                 Shale shakers
EQUIPMENT.                                         Manufacturer : Brandt.
Type : linear motion Numbers Two.
Mixing and circulating tank.
Swabbing gauge tank 100 bbls(inc in circ tank)
One   Pumping Volume 395 bbls
C/W Sand trap,Pill tank, Circulating tank w/mixer.
Mixing hopper and manifold.
 
Reserve Tank  One pumpable volume 350 bbls
Water tank One 400 bbls, Fuel tank Reserve 300 bbls.
 
ELEVATOR LINKS                                  Manufacturer : B J.
Type : Weldless.
One set : 1 Ύ” x 72 “
Rated capacity 150 ton
PIPE HANDLING                    Casing slips and slip holders.
EQUIPMENT                                           (Designed to allow passage of ESP)
Manufacturer : Blohm & Voss.  Size : 7”& 7 5/8”
B & Voss. 8 5/8” Hinged bowl/ , Rated capacity 100 ton..
Manufacturer : B&V .
Tubing Spider. Air Operated Size Range: 2 7/8” to 5 ½”    
Rated capacity  250,000 lbs.
 
Manufacturer : B&V.
Safety Clamps. 2 7/8”, to 4 ½” One set 
 3 ½”    to 7 5/8”One set.
 Total two sets.
 
Tubing and Casing.                               Manufacturer : B&V.
Elevators                                               Type :Center Latch.
Size  Range : 2 7/8:EUE.3 ½” EUE.4 ½”EUE. Tubing.
3 ½”  PH 6 Tubing.
7” Casing, 7 5/8” Casing
Number : Two each for 3 ½” and 4 ½” EUE  Tubing.
One each for each other size.
 
Drill Collar Elevators.
Manufacturer : B&V.
Type Centre Latch.  :Size Range : 3 1/8” to 4 !/4”
 
Manual Tongs.                       Manufacturer: Web Wilson.
                                               Type Super C-------2 Sets.
                                                Jaw assembly and pipe range :3 ½” to 8 5/8”, Torque range 35,000 ft/lbs.
 
Tubing Tong                                        Manufacturer : ECKEL
Type  :Hydraulic c/w integral back up system.
Size range : 2 7/8” to 5 ½”, Maximum torque  150,000 ft/lbs.
 
Hydraulic Power                  Manufacturer : ECKEL
Tong                      Rated Power : 60 HP Electric Motor.
                               Hoses :one each  1” x 50foot high pressure hose, One each 1 Ό”x 50 foot high pressure hose.
 
BIT BREAKER PLATES         One each   6” & 8 ½”
 
FISHING                                 Bowen Overshots
EQUIPMENT                                           Numbers Two series 150.
SH :5 ½” to 7 Ό”
SH.:2 7/8”, 3 ½” 4 ½”
Spare grapples and packers for ea size .
Bowen releasing spear.
3 ½”,4 ½” 5 ½” Spares for ea size.
Bowen Safety Joint. OD 4 Ύ”
Bowen bumper sub . OD 4 Ύ”
Bowen magnets. Two ea 6 Ύ”,9 3/ 8"
Bowen junk mills .two ea 6 Ύ”,9 3/8”
Bowen impression blocks two ea 6 Ύ”, 9 3/8”
CROSSOVERS                                        As required (full range to fit all type tubings)
 
CAMP                                                     Fully air conditioned & sound proof wih facilities
To sleep and feed Company and its contracters personnel
Electric panel including breakers designed for ground
Defection detection.
Accommodation .Number of skid mounted caravans with 2 Single rooms,
separate shower and toilet Furnished with cupboard ,office table and chair. Numbers
 
POWER DIESEL                                     Caterpillar. 3406 Nos 2
GENERATOR                                          All fire extinguishers ,smoking detectors, safety equipme
     

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
 

Copyright © 2006 . Yemen Drilling Company Ltd.All rights reserved